News Application Areas

Preparation of CNTs/SCF reinforcement to achieve synergistic improvement of epoxy resin-based composites interfacial properties

Researchers found that using a silane/maleimide-comodified water-based polyurethane (WPU-M-S) as a sizing agent in combination with furan-functionalized carbon nanotubes (CNTs-FA) through chemical modification...

Tomatoes - symbol image.
News Application Areas

Development of a novel coating technique for tomatos, using citric acid-crosslinked starch and cellulose nanofiber

Researchers found that the application of an edible coating, particularly by means of the innovative partial coating method, is an efficient strategy for extending the shelf life of tomatoes.

News Application Areas

Construction of smart halloysite nanocontainers for active long-term anticorrosion of epoxy coatings

Researchers found that the use of halloysite nanotubes (HNT) coated with chitosan (CS) and loaded with pH-responsive releasing corrosion inhibitors (BTA), as in the case of HNT-CS@BTA, significantly improves...

Fatty acid-based methacrylate monomers influence the properties of poly(acrylates), while mixing them with medium-oil alkyd resins leads to optimized material performance.
News Application Areas

Optimization of poly(acrylate) properties with fatty acid-based methacrylate monomers and alkyd resin mixtures

Researchers have found that the length of the fatty acid chain is decisive for the macromolecular properties of poly(acrylates), while fatty acid-based methacrylate monomers in high-temperature solution...

The addition of nitrogen-doped 3D-reduced graphene oxide changes the corrosion protection of epoxy/zinc composite coatings.
News Application Areas

Improving the anti-corrosive performance of epoxy/zinc composite coatings with N-doped 3D reduced graphene oxide

The addition of nitrogen-doped 3D-reduced graphene oxide changes the corrosion protection of epoxy/zinc composite coatings.

News Application Areas

Crosslinked succinic acid based non-isocyanate polyurethanes for corrosion resistant protective coatings

Solvent-based, cross-linkable non-isocyanate polyurethane (NIPU) coatings in non-toxic solvents such as diethylene glycol diethyl ether lead to improved water resistance.

News Application Areas

Hydrophobic phytic acid conversion layers for corrosion protection of steel surfaces

While phytic acid conversion coatings have shown success on diverse surfaces and the development of enhanced corrosion protection coatings, the latest results reveal their inability to improve corrosion...

News Application Areas

Salvinia-inspired biomimetic antifouling film

Many organisms in nature can adsorb bubbles underwater and form bubble layer, such as Salvinia, which has heterogeneous superhydrophobic surface with hydrophilic pins, allowing it to trap air underwater...

News Application Areas

Oil- and water-resistant paper coatings: A review

The most frequent method for overcoming the inborn limitations of paper materials is to add coatings on the outer layer of the paper.

News Application Areas

Mitigating quality degradation of deep-fat fried foods

A recent work focuses on enhancing the oxidative stability, physicochemical and sensory quality of deep-fat fried chicken nuggets using thyme essential oil-loaded oleogel coatings.

News Application Areas

New way to long-lasting deicing

Researchers have presented sturdy oil-impregnated polyurethane coatings with long-lasting and high-efficient deicing performance.

News Application Areas

Multifunctional wood coating

Researchers present a novel two-step strategy for the construction of weathering-resistant hydrophobic wood to extend its service life.

News Application Areas

With eggshells against corrosion

A new study demonstrated the sustainable use of eggshell wastes in enhancing the anticorrosion properties of zinc-rich epoxy coatings.