5. Jul 2021 | Application Areas
Self-healing epoxy coating for corrosion protection
During the study, urea-formaldehyde (UF) microcapsules loaded with tung oil were prepared by in-situ polymerisation. The mean diameter of the obtained microcapsules was 8.5 μm. The self-healing coating was prepared by the addition of 5 wt.% microcapsules into an epoxy matrix and then painted on a AA2024 substrate. The effect on the coating properties after the incorporation of microcapsules was investigated by adhesion tests and electrochemical impedance spectroscopy (EIS). It is found that 5 wt.% microcapsules in coating formulations did not impart a significant negative effect on coating properties.
Good anti-corrosion performance
SEM and EIS tests were used to evaluate the self-healing effect. According to the fitting results of the EIS data on the scratched samples, the new film that formed by the polymerisation of tung oil at the scratched area in the self-healing coating displays a resistance value of more than 106 Ω·cm2, which is much higher than 103 Ω·cm2 of the oxide layer in the neat epoxy coating. The neutral salt spray tests also confirm the good anti-corrosion performance of the self-healing coating.
The study has been published in Progress in Organic Coatings, Volume 156, July 2021.
This book brings together all the disciplines involved in the creation and use of corrosion protection coatings for metals. It presents the latest insights into the quality and chemistry of surfaces, the proper way to prepare them by conversion treatment, the function of resins and anticorrosion pigments in paints, and novel concepts in corrosion protection. As an added bonus, all the standards and directives mentioned in the text are grouped together in their own chapter for a better overview.
You are currently not logged in
To leave a comment, please log in.
There was an error while sending your comment. Please try again.
Your comment was too long. There are a maximum of 2048 symbols allowed!