The demand for textiles having a special performance like water repellency is mushrooming. Image source: Engin_Akyurt - Pixabay (symbol image).
27. Jul 2020 | Coatings Technologies
Preparation of cationic fluorinated acrylate copolymer latex
Researchers teport on cationic fluorinated acrylate copolymer latex and its application on cotton fabric.
Coupled with the improvement in people’s living standards, the demand for textiles having a special performance like water repellency is mushrooming. In a new study, the cationic fluorinated acrylate copolymer latex particles with a core–shell structure were synthesized via semicontinuous seed emulsion polymerization process, using Span 80, Tween 80, and dodecyltrimethylammonium chloride as composite emulsifier and (2-(acryloyloxy)ethyl)trimethylammonium chloride as a cationic monomer.
Cationic fluorinated acrylate copolymers were successfully confirmed through the FTIR, 1H NMR, and XPS analyses. In addition, the homogeneous latex particles (~ 132 nm of average size) with an evident core–shell structure were observed by TEM analysis, and a stable positive charge (48 ± 5 mV) on the surface of latex particles was demonstrated by zeta potential analysis.
Wxcellent hydrophobicity even at low concentration
Meanwhile, the results showed that the dosage of dodecafluoroheptyl methacrylate (DFMA) played a vital role in the hydrophobicity of the latex films and the one with the best water repellency was identified with 10 g of DFMA dosage. Furthermore, the cotton fabric finishing experiments demonstrated that, after finishing by the cationic fluorinated acrylate copolymer emulsion, the treated cotton fabric exhibited excellent hydrophobicity even at low concentration, with > 130° of the water contact angle and > 60 min of the static absorbing time.
The study has been published in Journal of Coatings Technology and Research. Volume 17, Issue 4.
The market demands modern, high-performance, flawless paints that possess specified properties. Where deviations from set points occur, the cause must be investigated and the error must be remedied. What "standard methods" don't disclose is why a particular coating either meets or fails to meet a requirement. Thus the author presents modern analytical techniques and their applications in the coatings industry that answer further complex questions. The information in this book can be used for performing failure analysis, production control and quality control, and also meet the requirements of modern high-level quality management. An excellent combination of theory and practice for formulators, paint engineers and applied technologists seeking a sound basic introduction to instrumental paint analysis and concrete answers to everyday problems.
You are currently not logged in
To leave a comment, please log in.
There was an error while sending your comment. Please try again.
Your comment was too long. There are a maximum of 2048 symbols allowed!