Created with Sketch.

23. May 2017 | Coatings Technologies

Microwave curing of silicone resin coatings

Microwave  processing was used to cure a sol-gel type silicone resin coating that normally requires thermal curing over 250 °C. The study focused on coatings applied on thermoplastic substrates.

Microwave curing of silicone resin coatings. Source:

Processing temperatures did not exceed 100 °C when using silicone carbide, carbon, and aluminium susceptors at 5% concentration by weight. Heating performance of the susceptors in bulk silicone resin matrix as well as in thin layers was compared.

No effective in-situ curing in thin layer

The results show that the heating response of the additives measured in bulk was significant. However, results for thin layers indicated that the effects of microwave heating on the coatings containing the susceptors were limited, and samples microwaved at 800 W for 4 h imparted insignificant increase of the coating hardness. This outcome was supported by AFM Phase images which revealed no distinctive layer near the susceptor particles. This suggests that the heat dissipation to the substrate and air with limited heating performance of the susceptors does not allow for an effective in-situ curing in thin layer.

The study is published in: Surface and Coatings Technology, Volume 320, 25 June 2017, Pages 13–17

EC Library Coatings for Plastics


Coatings for Plastics

This book presents the technology of coating plastics in a broad and integrated mode, treating both the single influence fields and their connections. One focus is set on the plastic substrate itself. Substrate topics are then connected with coating relevant plastic processing aspects and surface pre-treatment methods. The chapter of coating materials presents a broad portfolio of modern formulation and layer concepts, their main characteristics with respect to end users requirements.


This could also be interesting for you!


You are currently not logged in

To leave a comment, please log in.

For continuously improving and optimizing our websites, we use cookies. By using our website, you agree to the usage of cookies. For more information, please visit our Privacy policy.