Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Surface science concepts are up for revision

Thursday, 13 December 2018
pdf
Raw materials & technologies, Technologies

Surface science concepts are up for revision

Tuesday, 4 December 2018

The textbook directions for characterising the wetting properties of solid surfaces are likely to change as KAUST researchers demonstrate that conventional tests can be misleading.

The research team found that evaluations to assess the omniphobia of surfaces based only on contact angles can be deceptive. Source: blackday – stock.adobe.com.
The research team found that evaluations to assess the omniphobia of surfaces based only on contact angles can be deceptive. Source: blackday – sto...

Current go-to methods to determine surface wetting characteristics rely on measuring contact angles, whereby images of advancing and retracting droplets dispensed by capillaries onto surfaces are analysed to estimate angles at solid-liquid-vapor interfaces. A contact angle exceeding 90 degrees for water- or oil-based droplets indicates surfaces are hydrophobic (water repelling) or oleophobic (resistant to oil). Therefore, surfaces that meet this criterion for both water and oils are defined as omniphobic. High contact angles also ensure that, when immersed in liquids, surfaces entrap air, which is crucial for applications, such as desalination, drag reduction in transport pipes and antifouling materials for ships.

Deceptive ratings due to contact angle

Contact angles have proven extremely reliable for assessing the omniphobicity of surfaces that exploit liquid-repellent chemical coatings. Commercially available equipment and software exist for measuring real-time contact angles. However, in exploring coating-free approaches to repel liquids, Himanshu Mishra's team found that assessments based only on contact angles can be deceptive.

Contact-angle measurements and immersion

To demonstrate this discrepancy, the researchers investigated the wetting of silica surfaces comprising microscopic mushroom-shaped pillars by both contact-angle measurements and by immersion. When assessed by contact angle, the surfaces exhibited advancing and receding angles greater than 150 degrees, which according to the index used to evaluate surfaces classifies them as having remarkable liquid repellence or superomniphobicity. However, when assessed by immersion, the same liquids instantaneously imbibed the microtexture and thephobicitywas lost. Thus, surfaces that were characterised as superhydrophobic through contact angles led to flawed conclusions. In reality, localised defects, such as broken or missing pillars, in this microtexture and boundary enabled the liquid to penetrate and displace the trapped air.

Update of assessment criteria required

Using the same material, the researchers also demonstrated that if a wall was built around the pillar arrays, the resulting compartmentalised microtexture repelled liquid droplets in air and trapped air robustly on immersion. "As we identify new coating-free approaches to liquid repellence, the old criteria for assessing omniphobicity need to be updated, and the specificity of microtextures has to be recognised," said Mishra.

Advance green and robust alternatives

First author Sankara Arunachalam says, "During contact-angle measurements, the droplets occupy a limited number of spots on the surface. Therefore, effects of surface defects might be missed." However, the liquid can access the entire surface upon immersion. These findings are expected to advance the rational development of coating-free liquid-repellent surfaces as green and robust alternatives to current chemical treatments for applications, such as desalination and drag reduction.

The study is published in: Journal of Colloid and Interface Science Volume 534, 15 January 2019, Pages 156-162.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register