Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Robust icephobic epoxy coating using malei...

Wednesday, 03 June 2020
pdf
Raw materials & technologies, Technologies

Robust icephobic epoxy coating using maleic anhydride as a crosslinking agent

Wednesday, 20 May 2020

Robust hydrophobic and icephobic epoxy coatings were prepared by using maleic anhydride as a crosslinking agent. Such properties are not limited to the coating surface but are also present in the coating body.

The scientists' findings could make the de-icing on the underside of trains running in cold regions become more easily. Image source: MartinStr - Pixabay (symbol image).
The scientists' findings could make the de-icing on the underside of trains running in cold regions become more easily. Image source: MartinStr - P...

In severely cold regions, it is very difficult to prevent the formation of ice on solid surfaces, even on superhydrophobic (SH) surfaces. Compared with anti-icing surfaces, icephobic surfaces are more useful in practice.

In a new work, a traditional epoxy coating was modified by using maleic anhydride (MAH) as a crosslinking agent, in addition to filling a small amount of epoxy resin grafted with fluorine containing chains (FEP). The wettability and the mechanical properties of the modified coating, as well as the adhesive strength of ice on the coating surface and the stability of the icephobic properties of the coating, were systematically studied.

The results showed that the modified coating surface became more hydrophobic and the force required to remove ice from the surface was less than that needed for removing on the unmodified coating surface. Furthermore, the modified coating has excellent mechanical properties.

Hydrophobicity even after sanding with sandpaper

After sanding with abrasive paper, the unmodified coating surface is more hydrophilic, whereas the modified coating surface retains its hydrophobicity. X-ray photoelectron spectroscopy (XPS) indicates that compared with crosslinking by traditional polyamides, crosslinking using MAH greatly reduces the number of polar groups on the coating surface. The FEP introduction further reduces the free energy of the coating surface. As a result, the modified epoxy coating exhibits excellent icephobic performance.

The study is regarded to be helpful for the design of icephobic epoxy coatings for use in practical applications. For example, it may make the de-icing on the underside of trains running in cold regions become more easily.

The study has been published in Progress in Organic Coatings, Volume 142, May 2020.

Image source: Pixabay.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register