Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Preparation of epoxy/non-metallic conducti...

Tuesday, 11 August 2020
pdf
Raw materials & technologies, Technologies

Preparation of epoxy/non-metallic conductive fillers nano-composites

Wednesday, 29 July 2020

Scientists have prepared epoxy/non-metallic conductive fillers nano-composites and investigated their EMI shielding performance.

Epoxy/non-metallic conductive fillers nano-composites have been prepared. Image source: totojang1977 – stock.adobe.com (symbol image).

Epoxy/non-metallic conductive fillers nano-composites have been prepared. Image source: totojang1977 – stock.adobe.com (symbol image).

Nonmetallic conductive materials such as inherently conducting polymers (ICPs) and carbon nanomaterials play an important role in the manufacturing of electrically conductive polymer nanocomposites for Electromagnetic Interference (EMI) shielding applications. In the study, the electrical, dielectric and EMI shielding properties of epoxy (E)/non-metallic conductive materials are investigated. Polyaniline (PANI) as an ICP, graphene and multi-walled carbon nanotubes (MWCNTs), as the most well-known carbon nanomaterials, have been selected in order to make conductive epoxy nanocomposites.

The composites were prepared through solvent mixing method. It was observed that both real and imaginary parts of permittivity increase with CNT and thermally reduced graphene oxide (TRGO) loadings. Highest dielectric loss values were observed for E/PANI (35 %) composites, while dielectric constant was highest for both E/PANI (35 %) and E/TRGO (3%) nanocomposites.

Higher EMI Shielding Effectiveness

Furthermore, the EMI Shielding Effectiveness (SE) was higher at high loadings of conductive fillers. The maximum reflection loss was observed for E/CNT (2.5 %) and E/PANI (15 %); in fact, E/PANI (15 %) exhibited a relatively broad effective bandwidth (i.e., reflection loss<-10 dB) of 3.6 GHz, while this parameter is 2.1 GHz for E/CNT (2.5 %).

The study has been published in Progress in Organic Coatings, Volume 145.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register