Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Powder coatings  > Qualisteelcoat approval for Oxyplast

Monday, 16 September 2019
pdf
Raw materials & technologies, Technologies, Powder coatings

Qualisteelcoat approval for Oxyplast

Friday, 22 May 2015

The Belgian powder coating producer Protech-Oxyplast has received the Qualisteelcoat certificate for their two-coat system on Sendzimir steel.

The low bake primer "EF36" and polyester topcoat meets the C4-L corrosion class on this particular substrate.

Certificate covers all Qualicoat approved topcoats

In fact the PE-0030 certificate covers all Qualicoat approved topcoats such as the standard cure "PE50" and the low bake and outgassing "PE40" and "PE42 Sandtex" coatings. Another system of Oxyplast is in the running to achieve the C5 approval. The "PE40 Ag Kote" polyesters and the primer are also Qualicoat, GSB-on-Aluminium  and GSB-on-Steel approved .

The low bake primer "EF36" and polyester topcoat meets the C4-L corrosion class on this particular substrate. Source: hainichfoto/Fotolia

The low bake primer "EF36" and polyester topcoat meets the C4-L corrosion class on this particular substrate. Source: hainichfoto/Fotolia

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register