Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Influence of lignin-based PU coatings on a...

Thursday, 19 September 2019
pdf
Raw materials & technologies, Technologies

Influence of lignin-based PU coatings on ammonium sulfate release

Tuesday, 27 August 2019

The influence of the properties of lignin-based polyurethane (PU) coatings on the release behaviour of ammonium sulfate was assessed through complete physicochemical, structural, and morphological characterisation.

Both coatings behaved in accordance with CEN standards for CRF systems. Source: DENISCIMAF / Pixabay.

Both coatings behaved in accordance with CEN standards for CRF systems. Source: DENISCIMAF / Pixabay.

The influence of the release medium was evaluated as well. The higher the amount of lignin in the coatings was, the lower the pore diameter and swelling degree and the higher crosslinking were. The hydrophobicity of coatings was not significantly changed by increasing the lignin content. However, the opposite behaviour was observed for their biodegradability. The results of the nutrient release experiments showed that the two formulations of lignin-based PUs had very similar behaviour in terms of release rates of NH4+ and SO42− in both release media, despite their different properties.

Potential suitability for agricultural applications

However, there was a difference between their release rate constants obtained by using three different kinetic models. In addition, both PU coatings released a higher amount of SO42− than NH4+ in both media. The thermodynamic data suggest that dissolution and release processes for SO42− are more spontaneous than that for NH4+. Nevertheless, both coatings behaved in accordance with CEN standards for CRF systems, representing a potential technique for agricultural applications.

The study is published in: Journal of Coatings Technology and Research  March 2019, Volume 16, Issue 2, pp 449–463.

Image source: Pixabay

Event tip: In October the European Coatings Technology Forum | Bio-based Coatings will gather international experts from the coatings sector to discuss and present the latest innovations and products that can help to reduce dependency on fossil raw materials.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register