Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Fluorescence boosts performance of cool co...

Monday, 23 September 2019
pdf
Raw materials & technologies, Technologies

Fluorescence boosts performance of cool coloured pigments

Tuesday, 4 October 2016

Elementary school science teaches us that in the sun, dark colours get hot while white stays cool. New research has found an exception: Scientists have determined that certain dark pigments can stay just as cool as white by using fluorescence.

Sharon Chen and Paul Berdahl hold up their prototype coating made from ruby powder and show synthetic ruby crystals used in early tests. Source: Marilyn Chung/Berkeley Lab
Sharon Chen and Paul Berdahl hold up their prototype coating made from ruby powder and show synthetic ruby crystals used in early tests. Source: Ma...

The researchers from Berkeley Lab tested this concept by colouring cool roof coatings with ruby red (aluminum oxide doped with chromium). Led by Berkeley Lab scientist Paul Berdahl, they first found that white paint overlaid with a layer of ruby crystals stayed as cool as a commercial white coating. Next, they synthesised ruby pigment to mix into coatings. Their results were published recently in the journal Solar Energy Materials & Solar Cells.

Reflective roofs can cool buildings

Substantial research over the years from the Lab's Heat Island Group has found that reflective roofs and walls can cool buildings and cars. This reduces the need for air conditioning and mitigates the urban heat island effect. By reflecting the sun’s rays back to space, these cool materials also release less heat into the atmosphere, thus cooling the planet and offsetting the warming effects of substantial amounts of greenhouse gas emissions.

However, wider adoption of cool roofs has been hindered by aesthetic considerations. "We’ve heard many times (from roofing materials manufacturers), ‘We can’t sell white or pastel roofs; our customers want dark green, dark brown, and so on,’” Berdahl said.

Pigments reflect invisible "near-infrared” light

Over the past 15 years, Heat Island Group researchers have used special pigments that strongly reflect invisible "near-infrared” light to make dark surfaces that stay cooler in the sun than conventional dark surfaces, though still not as cool as white surfaces. This new work shows that fluorescent cooling can boost the performance of these pigments by re-emitting at longer wavelengths some of the visible light that the surface must absorb to appear dark.

This opens the door to darker colours of not only cool roofs but of any object that is subject to prolonged periods of sun exposure, including vehicles, ships, storage tanks, and PVC piping. "We do think cars will be a likely application,” Berdahl said. "And it’s not just a matter of comfort or saving energy by avoiding AC use. We learned from colleagues that with electric vehicles, the battery lifetime is degraded by higher temperatures, so if you can keep the automobile cooler with use of a suitable coating then it extends the life of the battery.”

New: The use of the fluorescence process

Using fluorescence, or photoluminescence, for cool materials is a new concept, and Berdahl, who is a physicist by training, has a patent pending on the technology. "People understand that materials that fluoresce are emitting energy,” he said. "What’s new here is the use of the fluorescence process to keep buildings cooler.”

When light hits a fluorescent material, the material actively emits energy in response, rather than passively reflecting the energy. Berdahl’s idea was to find a material that would absorb visible light and fluoresce (re-emit) mostly or entirely in the invisible near-infrared portion of the sun’s spectrum. "There have been thousands of fluorescent compounds identified,” he said. "Ruby’s properties are well known and well studied, and I realized it’s a material that could work.”

His first experiment was to use an array of synthetic ruby crystals, which he purchased online and said were surprisingly inexpensive. Attached to a bright white coating and exposed to bright sunlight, the dark-red ruby-covered coating stayed cooler than an off-white surface.

Ruby paints stayed as cool as white materials

Berdahl and Berkeley Lab research associate Sharon Chen then synthesised ruby powder, or aluminum oxide, doped with varying amounts of chromium to create different shades of red pigment. They prepared ruby paint from the powders, and applied these paints over bright white substrates. When exposed to sunlight, the ruby paint samples stayed as cool as white materials. "The ruby powder does need more work to make it as deep red as the ruby crystal,” Berdahl said.

If the product were to be commercialised, Berdahl said that the cost is not expected to be substantial and its durability is expected to be similar to other coatings. "Rubies have a reputation for being expensive, but they’re mostly aluminum oxide, which sells for about 70 cents per kilogram (or about 30 cents per pound),” he said.

PPG Industries, a Pittsburgh, Pennsylvania-based coating manufacturer also involved in the research, is conducting weathering tests with prototype fluorescent coatings. In follow-up work Berdahl has identified blue materials that also fluoresce and showed that they can be combined with other colours to yield green and even black materials that stay cool.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register