Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Technologies  > Adhesive bonding with pre-applied adhesives

Saturday, 21 September 2019
pdf
Raw materials & technologies, Technologies

Adhesive bonding with pre-applied adhesives

Tuesday, 3 June 2014

Adhesive bonding technology is an effective and inexpensive means of seamlessly joining two parts, even two made of different materials.

The prize winning team. Source: Dirk Mahler/Fraunhofer

The prize winning team. Source: Dirk Mahler/Fraunhofer

Especially in lightweight construction, adhesive bonding is the preferred technique because many of the materials used can hardly be joined otherwise. However, since liquid adhesives need time to cure, they cannot be applied in every production step. In hopes of finding a way to eliminate the need for regularly applying liquid adhesive while joining fasteners, the automotive supplier Stanley Engineered Fastening, turned to the researchers at the Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM. Their solution was a two-step process in which adhesive is initially deposited on one of the parts and then dried to form a non-sticky layer. During a subsequent production step, the adhesive is hardened and the two parts are bonded together.

Micro-dispersion distributes hardening agents

Although two-step bonding techniques aren’t new – early postage stamps were coated with an adhesive that would only stick to envelopes once moistened. The researchers have successfully developed the technique to allow for a high-strength adhesive bond suitable for industrial use – no easy task, since the adhesives must fulfill different and sometimes contradictory requirements. "Once the adhesive is applied, it can’t be tacky and it has to withstand long storage times,” explains chemical engineer Andreas Lühring from Fraunhofer IFAM. But the adhesive has to do more than that. "The adhesive also has to be very reactive and harden quickly during joining.” The researchers’ concept combines resins and hardening agents that melt at different temperatures. "We use micro-dispersion to finely distribute hardening agents with considerably higher melting points throughout the resin base,” adds Professor Andreas Hartwig.

Construction kit offers adhesives based on different materials

The resulting reactive, hot melt adhesive is used in the manufacture of fastening bolts, for instance. First the material is heated and then applied onto the fastener. After it cools, it solidifies again. The fastener can then be transported and stored without difficulty. To harden the actual adhesive, it must be heated to more than 150° C in a controlled way. "Only then is the actual hardening agent melted and the adhesive activated,” explains Lühring. In this way, two parts can be bonded to each other within seconds. "There is one disadvantage to reactive adhesives like these – they can be stored for a long time, but not indefinitely,” says Dr. Matthias Popp, group manager at Fraunhofer IFAM. That’s why the researchers had added an additional, visual means of monitoring the adhesive – if the substance has lost its functionality, it changes colour. These pre-applicable structural adhesives (PASA) are also suitable for other applications, including a variable "construction kit” that offers adhesives based on different materials and hardening principles.

Researchers received Joseph von Fraunhofer price

The experts have altered the composition of the adhesives so that they yield the best possible productivity and characteristics for a wide variety of applications. For this development, Andreas Lühring, Andreas Hartwig and Matthias Popp received one of this year’s Joseph von Fraunhofer prices.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register