Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Raw materials  > Coatings binders  > Preparing soybean oil-based curing agents...

Monday, 16 September 2019
pdf
Raw materials & technologies, Raw materials, Coatings binders

Preparing soybean oil-based curing agents for epoxy resin

Thursday, 19 January 2017

In order to improve the flexibility properties of conventional epoxy resin, researchers from Guangdong University of Technology have synthesised two novel soybean oil-based curing agents for epoxy resin.

Preparing soybean oil-based curing agents for epoxy resin. Source: Rainer Sturm/pixelio.de

Preparing soybean oil-based curing agents for epoxy resin. Source: Rainer Sturm/pixelio.de

The curing agent obtained from the reaction between epoxy soybean oil and ethylene diamine was named EEDA, and another curing agent derived from epoxy soybean oil and isophorone diamine was named EIPDA.

Aliphatic chains enhance toughness of cured products

Several techniques were used to systematically investigate the effects of the structure and content of the two curing agents on the properties of the cured products. The Fourier transform infrared analysis demonstrated that epoxy resin reacted with soybean oil-based curing agents. The differential scanning calorimetry analysis showed that the curing process between diglycidyl ether of bisphenol-A (DGEBA) and soybean oil-based curing agents only had an exothermic peak. Thermogravimetric analysis indicated that the cured DGEBA/EIPDA system was more stable than the DGEBA/EEDA system below 300 °C. Mechanical tests and Shore D hardness tests suggested that excessive EEDA greatly enhanced the toughness of cured products because of the introduction of aliphatic chains.

The study is published in: Applied Polymer.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register