Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Applications  > The role of calcium on the formation of al...

Wednesday, 11 December 2019
pdf
Raw materials & technologies, Applications

The role of calcium on the formation of alkali-silica reaction products

Friday, 29 November 2019

In a recently published study, thermodynamic data for synthesised ASR products (i.e., K-shlykovite, Na-shlykovite and ASR-P1) at 80 °C are determined.

Predicting the conditions for alkali-silica reaction (ASR) had been difficult for several decades due to the lack of in-depth knowledge of the ASR products. Source: manolofranco / Pixabay.
Predicting the conditions for alkali-silica reaction (ASR) had been difficult for several decades due to the lack of in-depth knowledge of the ASR...

The effect of the initial Ca/Si ratio, from 0 to 0.5, on the formation of ASR products at 80 °C is investigated for the samples prepared with an initially fixed K/Si or Na/Si ratio of 0.5. The results show that the amount of ASR products formed first increases and then decreases with increasing the initial Ca/Si ratio.

Conversion of ASR products to C-S-H

The reduced amount of ASR products at higher Ca/Si ratio is accompanied by formation of C-S-H, suggesting that a conversion of ASR products to C-S-H can occur at high Ca/Si ratio. The solid phases and aqueous chemistry predicted by thermodynamic modelling agrees very well with the experimental results.

The study is published in: Cement and Concrete Research Volume 126, December 2019, 105898.

Image source: Pixabay

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register