Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Applications  > Protective & Marine coatings  > Viability of epoxy-siloxane hybrid coating...

Tuesday, 24 September 2019
pdf
Raw materials & technologies, Applications, Protective & Marine coatings

Viability of epoxy-siloxane hybrid coatings for preventing steel corrosion

Wednesday, 27 January 2016

In a research work, eight coatings consisting of primers, topcoats and combinations of primers/topcoats were evaluated.

Eight coatings comprising single coats or multiple coats were assessed. Source: BirgitH/pixelio.de

Eight coatings comprising single coats or multiple coats were assessed. Source: BirgitH/pixelio.de

Salt spray test (SST) and impedance measurements were carried out for evaluating macroscopic failures (blistering, adhesion, etc.) and the electrochemical behaviour of the referred coatings, respectively, which were supported by surface characterisation techniques such as scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray mapping (XRM).

Epoxy-siloxane single coat demonstrates excellent properties

Coating systems comprising an epoxy-siloxane topcoat have offered a better corrosion protection of the steel substrate than its counterpart with polyurethane topcoat (comparing coating systems with the same primer). Also, the addition of any of the topcoats has outperformed the properties conferred by the epoxy coating pigmented with zinc phosphate (ZP) and micaceous iron oxide (MIO), which have shown the worst behaviour as a single coat. The single epoxy-siloxane topcoat and the epoxy-polyurethane water-based coating system have also provided excellent protective properties, thus allowing to open up new opportunities to be implemented in real structures.

The study is published in: Progress in Organic Coatings, Volume 92, March 2016, Pages 29-43.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register