Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Applications  > Protective & Marine coatings  > Best tests for anti-corrosive paints - a p...

Monday, 23 September 2019
pdf
Raw materials & technologies, Applications, Protective & Marine coatings

Best tests for anti-corrosive paints - a personal viewpoint

Tuesday, 21 February 2017

In a research work, two scientists discuss tests for anti-corrosive paints and provide numerous references to back up their choices.

Emphasis on oxide maintenance being required for successful operation of coatings. Source: pixabay.com/CCO

Emphasis on oxide maintenance being required for successful operation of coatings. Source: pixabay.com/CCO

The paper starts by putting forward a mechanism for the way that anti-corrosive paints work. This draws on previous work on understanding of mechanism but puts stronger emphasis on the maintenance of the oxide film of the metal under the paint as the essential feature. If this mechanism is correct then it suggests various properties which a paint coating should have. In many cases a minimum value of these properties is all that is required. In some cases e.g. DC resistance, it is advantageous to have as high as possible value of this property at the start due to degradation with time.

Suggestions for future work

The paper then details a series of tests, chosen by the authors for their relative simplicity, to measure these properties in a quantitative manner and hence to assist in formulation of new or better coatings. These tests are the personal selection of the authors and they admit that others may make different choices. They have been divided into those best conducted on the free paint film and those which are conducted on the metal and paint together, the latter including one test to be conducted on the metal alone.

Among the second group, suggestions have been made for electrochemical tests which are non-destructive and can thus be used for quality control and monitoring. There is a brief discussion of accelerated tests with the emphasis again on quantitative non-destructive assessment methods. Numerous pertinent references are provided. The papers concludes with suggestions for future work.

The study is published in: Progress in Organic Coatings, Volume 102, Part A, January 2017, Pages 8–17

Book tips:

Accelerated Testing: 192 pages on how to identify the weak points of accelerated testing, to avoid errors and thus to boost confidence in the test results.

Anticorrosive Coatings: 216 pages about all the disciplines involved in the creation and use of corrosion protection coatings for metals and the latest insights into the quality and chemistry of surfaces.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register