Please wait.'

Page is loading'

Home  > Raw materials & technologies  > Applications  > Improving self-consolidating concrete suit...

Thursday, 17 October 2019
Raw materials & technologies, Applications

Improving self-consolidating concrete suitable for bridge building

Tuesday, 15 March 2016

A researcher is studying how to make concrete that can be placed without a lot of human intervention, and that can be poured in hard-to-reach places where people can’t easily manipulate it.

Professor Dimitri Feys is studying ways to make self-consolidating concrete suitable for bridge building and other construction projects. Source: Missouri S&T
Professor Dimitri Feys is studying ways to make self-consolidating concrete suitable for bridge building and other construction projects. Source: M...

Dr. Dimitri Feys, assistant professor of civil, architectural and environmental engineering at Missouri University of Science and Technology, is working with self-consolidating concrete to produce beams that can be used to construct bridges, parking garages or other construction. Self-consolidating concrete is a type that flows easily in concrete forms or molds.

Main use of the concrete is in Japan and Europe

"The main use of this concrete is in Japan and Europe - 100 percent of the pre-cast industry in Denmark uses this type - and it slowly is making its way in the U.S. market,” he says. But there are challenges, Feys says. Chief among them is figuring out a way to keep the concrete homogenous throughout the produced structural element. That’s important because the aggregate - the gravel or rocks used in the mixture - need to be uniformly distributed to ensure even strength throughout the product. If the gravel sinks to the bottom as the concrete flows through the form - known as dynamic segregation - it negatively affects the finished product’s quality in strength and durability.

Concrete is more sensitive to stiffening

Feys works with Coreslab Structures in Marshall, Missouri, which has made 30-foot beams and 60-foot beams for the project. In the latest test on Feb. 16, they poured a 60-foot beam. "It went good, but not perfect,” Feys says. "It seems like the 60-foot flow distance is a step too far.” The distance problem needs to be explained as a function of time, he says. "Fresh concrete properties change with time and as a function of how fast it flows,” Feys says. "If it flows fast, it remains fluid or can even become more fluid. If it stops, or flows slowly, it stiffens. That stiffening is a function of mix design and temperature. Since we are using a rapid-hardening cement and self-consolidating concrete, this concrete is more sensitive to stiffening.”

Challenge is to incorporate super-plasticiser for flowability

Feys can manipulate the concrete’s rheology, or flow, by changing its ratio of cement, aggregate, sand and water. And he can further change its properties by adding super-plasticisers, primarily polycarboxylate, which are essential for the concrete to flow easily. The challenge is to incorporate the proper amount of super-plasticiser for flowability while keeping the aggregate well dispersed. He uses core samples to test the beams for gravel distribution, strength and an adequate distribution of air bubbles, essential for freeze-thaw durability.

Ultrasound testing techniques evaluate homogeneity

Feys and Dr. Julie Ann Hartell, assistant professor of civil and environmental engineering at Oklahoma State University, used ultrasound testing techniques on the produced beams to evaluate homogeneity. "Inferior properties in specific zones of precast beams can lead to reduced durability, leading to a premature need for repair or replacement, which in the end will cost taxpayers more money,” Feys says. The ultimate goal is to make self-consolidating concrete a common product used in the U.S., he says.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in