Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Applications  > Epoxy adhesives for metal-polymer lap-join...

Wednesday, 11 December 2019
pdf
Raw materials & technologies, Applications

Epoxy adhesives for metal-polymer lap-joint applications

Wednesday, 27 November 2019

In a new work, epoxy formulations containing phenolic resin, recycled tire powder, and clay nanoplatelets were optimised based on L9 Taguchi experimental design approach.

Brittleness and low thermal stability of epoxy confines its usage as adhesive for metal-polymer interfaces. Source: makuba – Fotolia.com.

Brittleness and low thermal stability of epoxy confines its usage as adhesive for metal-polymer interfaces. Source: makuba – Fotolia.com.

The main effects of phenolic resin (X1 (wt.%), for thermal stability), recycled tire powder (X2 (wt.%), economically reasonable for toughening), and clay nanoplatelets (X3 (wt.%), for modulus enhancement) on mechanical properties of epoxy adhesives including tensile strength, Young’s modulus, and toughness, were studied by taking into account signal-to-noise ratio (S/N) as well as the analysis of variance (ANOVA).

Improvement of thermal stability

It was found that at X1 level of 50 wt.%, X2 level of 10 wt.%, and X3 level of 2 wt.% an increase of about 39% was observed in the single-lap shear strength compared to blank epoxy adhesive formulation. Scanning electron microscopy revealed crack mechanism in the form of deviation of crack growth pathway when encountered with large platy nanoclays. Thermal stability of epoxy was also improved by 16% based on degradation peak temperature monitoring.

The study is published in: Progress in Organic Coatings Volume 136, November 2019, 105291.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register