Please wait.'

Page is loading'


Home  > Raw materials & technologies  > Applications  > Protective & Marine coatings  > Improved corrosion protection with flake-t...

Tuesday, 27 June 2017
pdf
Raw materials & technologies, Applications, Protective & Marine coatings

Improved corrosion protection with flake-type zinc-phosphate particles

Wednesday, 19 April 2017

Scientists have demontrated that coatings with flake-type zinc-phosphate particles exhibit better corrosion protection than spheroidal particles.

Because of the disordered arrangement of the flakes, they can not run through the sandglass like spheric particles do. Source: Ollmann/INM

Because of the disordered arrangement of the flakes, they can not run through the sandglass like spheric particles do. Source: Ollmann/INM

Large quantities of steel are used in architecture, bridge construction and ship-building. Structures of this type are intended to be long-lasting. Furthermore, even in the course of many years, they should not lose any of their qualities regarding strength and safety.

Ten times as long as thick

For this reason, the steel plates and girders used must have extensive and durable protection against corrosion. In particular, the steel is attacked by oxygen in the air, water vapor and salts. To prevent the corrosive substances from penetrating into the material, a common method is to create an anti-corrosion coating by applying paint layers of zinc-phosphate particles. Now, research scientists at INM – Leibniz Institute for New Materials developed a special type of zinc-phosphate particles: They are flake-like in shape because they are ten times as long as they are thick.

Better solubility

First experiments with those new, flake-type shaped particles indicate, because of their anisotropy, a better solubility compared to spherical particles. "Now, more phosphate-ions are soluted and repassivation of bare metal surface, for example as a consequence of a mechanical damage, is better and faster,” the head of the program division Nanomers, Carsten Becker-Willinger says.

Deposited in layers

"In first test coatings, we were also able to demonstrate that the flake-type particles are deposited in layers on top of each other thus creating a wall-like structure. This means that the penetration of gas molecules through the protective coating is longer because they have to find their way through the ´cracks in the wall´,” the chemist Becker-Willinger explains. The result was, that the corrosion process was much slower than with coatings with spheroidal particles where the gas molecules can find their way through the protective coating to the metal much more quickly.

Further tests confirm results

In further series of tests, the scientists were able to validate the effectiveness of the new particles. To do so, they immersed steel plates both in electrolyte solutions with spheroidal zinc-phosphate particles and with flake-type zinc-phosphate particles in each case. After just a few hours, the steel plates in the electrolytes with spheroidal particles were showing signs of corrosion whereas the steel plates in the electrolytes with flake-type particles were still in perfect condition, even after three days. The flake-type shaped zinc-phosphate particles are synthesised in a controlled precipitation process.

top of page
Comments (0)
Add Comment

Post comment

You are not logged in

register